A true performer in profiled roofs sheet with a touch of elegance and rigidity blended harmoniously. It remains one of the most preferred and frequently specified roof types by architects and engineers in building projects. Product rigidity owing to interlocking ribs and a unique concealed clips fixing gives it a perpetual appeal.
The dense profile with its high rib forms has excellent spanning capability reaching purlins over greater distances exceeding 1800mm, hence allowing for more economical designs. The deeper pan between ribs also makes it suitable for laying at low pitch level without risking leakage due to water spilling over side laps.
Concealed clips fixing allows the Profile to be fixed easily with just nudging on the roof sheet until the ribs clicked into the brackets beneath. It fits nichely with the roof profile and this ingenuity design has been tested to perform even under rigorous wind conditions generated in wind tunnels laboratories. Hence a safe load determined from the test allows conditions sustainable against roof pull outs due to wind uplift and suctions.
This roof profile is appropriate for buildings with large overall roof area such as warehouses, factories, office building or multipurpose halls.
Technical Specifications
Total Coated Thickness
mm
Width Coverage
mm
Min recommended pitch
Max roof overhang unsupported
Max roof overhang stiffened with 50mm x 50mm x 1.6mm angle and gutter mm
Products
Spanlok Installation Guide 